Assortment / Termoinsulation Material


Styrofoam

Styrofoam EPS 50 (12 kg/m3)

Expanded polystyrene panel (EPS)

Properties:
  • great thermal insulation
  • low weight
  • good mechanical and structural properties
  • simple processing at installation
  • environment and health friendly materials
  • not resistant to organic solvents
Areas of use:
  • thermal insulation in non-structural areas
Size: 1000x500 mm
Other sizes possible - by request

Coefficient of thermal conductivity: l=0,041 W/mK
EPS 50 with specific weight of 12 kg/m3 Thickness (cm) Nominal dimension (cm) One package (m2) Thermal resistance Rt m2 K/V
Intended for thermal insulation for non-structural objects (to fill holes, etc.) 1 100x50 25 0,20
2 12,5 0,45
3 8 0,70
4 6 0,95
5 5 1,20
6 4 1,45
7 3,5 1,70
8 3 1,95
9 2,5 2,20
10 2,5 2,40
EPS HRN EN 13163 T1-L1-W1-S1-P3-DS(N)5-BS75-CS(10)50


Styrofoam EPS 70 (15 kg/m3)

Expanded polystyrene panel (EPS)
Properties:
  • great thermal insulation
  • low weight
  • good mechanical and structural properties
  • simple processing at installation
  • environment and health friendly materials
  • not resistant to organic solvents
Areas of use:
  • thermal insulation of internal and external walls, pitched roofs, ceilings, floors with a smaller load...
Size: 1000x500 mm
Other sizes possible - by request

Coefficient of thermal conductivity: l=0,038 W/mK
EPS 70 with specific weight of 15 kg/m3 Thickness (cm) Nominal dimension (cm) One package (m2) Thermal resistance Rt m2 K/V
Intended for thermal insulation of pitched roofs, floors with small loads, facade cladding of the facade bricks, etc. 1 100x50 25 0,25
2 12,5 0,50
3 8 0,75
4 6 1,05
5 5 1,30
6 4 1,55
7 3,5 1,80
8 3 2,10
9 2,5 2,35
10 2,5 2,60
EPS HRN EN 13163 T1-L1-W1-S1-P3-DS(N)5-BS115-CS(10)70


Styrofoam EPS 100 (20 kg/m3)

Expanded polystyrene panel (EPS)
Properties:
  • great thermal insulation
  • low weight
  • good mechanical and structural properties
  • simple processing at installation
  • environment and health friendly materials
  • not resistant to organic solvents
Areas of use:
  • thermal insulation of flat roofs, floors with larger loads...
Size: 1000x500 mm
Other sizes possible - by request

Coefficient of thermal conductivity: l=0,036 W/mK
EPS 100 with specific weight of 20 kg/m3 Thickness (cm) Nominal dimension (cm) One package (m2) Thermal resistance Rt m2 K/V
Intended for thermal insulation of floors, flat roofs, and in situations where bigger bearing capacity is required 1 100x50 25 0,25
2 12,5 0,55
3 8 0,80
4 6 1,10
5 5 1,35
6 4 1,65
7 3,5 1,90
8 3 2,20
9 2,5 2,50
10 2,5 2,75
EPS HRN EN 13163 T1-L1-W1-S1-P3-DS(N)5-BS150-CS(10)100


Styrofoam EPS 150 (25 kg/m3)

Expanded polystyrene panel (EPS)
Properties:
  • great thermal insulation
  • low weight
  • good mechanical and structural properties
  • simple processing at installation
  • environment and health friendly materials
  • not resistant to organic solvents
Areas of use:
  • as thermal insulation of flat roofs and floors with bigger load, to the 150 kPa
  • manufacturers of synthetic waterproofing tape recommend it for flat roofs under such tapes
  • as thermal insulation in cold storages, terraces and other
Size: 1000x500 mm
Other sizes possible - by request

Coefficient of thermal conductivity: l=0,035 W/mK
EPS 150 with specific weight of 25 kg/m3 Thickness (cm) Nominal dimension (cm) One package (m2) Thermal resistance Rt m2 K/V
Intended for thermal insulation of floors, flat roofs, and in situations where bigger bearing capacity is required 1 100x50 25 0,25
2 12,5 0,55
3 8 0,85
4 6 1,10
5 5 1,40
6 4 1,70
7 3,5 2,00
8 3 2,25
9 2,5 2,55
10 2,5 2,85
EPS HRN EN 13163 T1-L1-W1-S1-P3-DS(N)5-BS200-CS(10)150


Styrofoam EPS 200 (30 kg/m3)

Expanded polystyrene panel (EPS)
Properties:
  • great thermal insulation
  • low weight
  • good mechanical and structural properties
  • simple processing at installation
  • environment and health friendly materials
  • not resistant to organic solvents
Areas of use:
  • thermal insulation of building structures with the highest load >200 kPa, such as flat roofs notches - parking lots, industrial floors, cold storages, gyms, etc.
Size: 1000x500 mm
Other sizes possible - by request

Coefficient of thermal conductivity: l=0,035 W/mK
EPS 200 with specific weight of 30 kg/m3 Thickness (cm) Nominal dimension (cm) One package (m2) Thermal resistance Rt m2 K/V
Intended for thermal insulation of floors, and in the places where high capacity is required 1 100x50 25 0,25
2 12,5 0,55
3 8 0,85
4 6 1,10
5 5 1,40
6 4 1,70
7 3,5 2,00
8 3 2,25
9 2,5 2,55
10 2,5 2,85
EPS HRN EN 13163 T1-L1-W1-S1-P3-DS(N)5-BS250-CS(10)200


Styrofoam EPS T (elastificirani)

Expanded polystyrene panel (EPS)
Properties:
  • great thermal insulation
  • low weight
  • good mechanical and structural properties
  • simple processing at installation
  • environment and health friendly materials
  • not resistant to organic solvents
Areas of use:
  • Floating floors in buildings of all purposes for lowering the lewels of impact sound - the rumble in the floors between floors and the floors on the ground, and against the spread of sound sideways and up - down
Size: 0,5 cm x 100 m i 1 cm x 50 m (roll)

Coefficient of thermal conductivity: l=0,042 W/mK
Elasticated styrofoam - EPS T Thickness (cm) Nominal dimension (m) Thermal resistance Rt m2 K/V
Intended for floating floors to lower levels of impact sound 0,5 100 0,10
1 50 0,20
EPS HRN EN 13163 T3-L1-W1-S3-CP4-SD20/SD15

Facade styrofoam


Styrofoam facade EPS F - ship-lap edge

Expanded polystyrene panel (EPS)
Properties:
  • great thermal insulation
  • low weight
  • small resistance factor to water vapor diffusion
  • specially made without recycled expanded polystiren
  • mellow
  • sufficiently dimensionally stable
  • difficult to ignite
  • ship-lap edge - prevents the entry of construction adhesive in the panel joint
  • environment and health friendly materials
Areas of use:
  • for use in integrated systems for external thermal insulation ETICS
Size: 1000x500 mm

Coefficient of thermal conductivity: l=0,039 W/mK
Facade styrofoam - EPS F preklop Thickness (cm) Nominal dimension (cm) One package (m2) Thermal resistance Rt m2 K/V
for use in integrated systems for external thermal insulation ETICS 4 100x50 6 1,05
5 5 1,30
6 4 1,55
7 3,5 1,80
8 3 2,10
9 2,5 2,35
10 2,5 2,6
11 2 2,85
12 2 3,15
13 2 3,40
14 1,5 3,65
15 1,5 3,9
16 1,5 4,20
17 1,5 4,45
18 1 4,7
19 1 5
20 1 5,25
EPS HRN EN 13163 T2-L2-W2-S2-P4-DS(70,-)1-DS(N)2-BS115-TR150

Facade styrofoam EPS F

Expanded polystyrene panel (EPS)
Properties:
  • great thermal insulation
  • low weight
  • small resistance factor to water vapor diffusion
  • specially made without recycled expanded polystiren
  • mellow
  • sufficiently dimensionally stable
  • difficult to ignite
  • environment and health friendly materials
Areas of use:
  • for use in integrated systems for external thermal insulation ETICS
Size: 1000x500 mm

Coefficient of thermal conductivity: l=0,039 W/mK
Facade styrofoam - EPS F Thickness (cm) Nominal dimension (cm) One package (m2) Thermal resistance Rt m2 K/V
for use in integrated systems for external thermal insulation ETICS 4 100x50 6 1,05
5 5 1,30
6 4 1,55
7 3,5 1,80
8 3 2,10
9 2,5 2,35
10 2,5 2,6
11 2 2,85
12 2 3,15
13 2 3,40
14 1,5 3,65
15 1,5 3,9
16 1,5 4,20
17 1,5 4,45
18 1 4,7
19 1 5
20 1 5,25
EPS HRN EN 13163 T2-L2-W2-S2-P4-DS(70,-)1-DS(N)2-BS100-TR150

Extruded polystyrene - XPS


Fibran XPS 300-L

Recommended uses:
  • Inverted warm flat roofs
  • DUO roofs (low energy and passive houses)
  • PLUS roofs (renovations, energy class upgrade)
  • Warm flat roofs
  • Green roofs
  • Roof terraces
  • Floors between storeys
  • Basement floor
  • Floors with underfloor heating
  • Extra loaded floors
  • Cold storages
  • Hanging façades
  • Perimeter basement walls, even when ground water is present
  • Swimming pools
Board thickness (mm) Quantity per package (m2) Compressive strength (kPa) Board dimensions (mm) Declared thermal conductivity (after 25 years) - W/mK
30 10,50 300 1250x600
stepenasti rub (preklop)
glatka površina
0,033
40 7,50 0,034
50 6 0,034
60 5,25 0,035
80 3,75 0,035
100 3,0 0,035
120 2,25 0,036
140 2,25 0,038
160 1,50 0,040
180 1,50 0,040
200 1,50 0,040
XPS - EN 13164 - T1 - CS(10\Y)300 - CC(2/1,5/50)115 - DS(TH) - DLT(2)5 - WL(T)0,7 - WD(V)3 - FT2

Fibran XPS 400-L

Recommended uses:
  • Inverted warm flat roofs
  • DUO roofs (low energy and passive houses)
  • PLUS roofs (renovations, energy-class upgrade)
  • Warm flat roof
  • Green roof
  • Roof terraces
  • Extra loaded floors
  • Cold storages
  • Perimeter basement walls, even if ground water is present
  • Foundation slabs
Board thickness (mm) Quantity per package (m2) Compressive strength (kPa) Board dimensions (mm) Declared thermal conductivity (after 25 years) - W/mK
80 7,50 400 2500x600
ship-lap edge
smooth surface
0,035
100 6 0,035
120 4,50 0,036
140 4,50 0,038
160 3 0,040
180 3 0,040
200 3 0,040
Manufacturing by request! - Dimensions upon request: 1250x600 mm
XPS - EN 13164 - T1 - CS(10\Y)400 - DS(TH) - DLT(2)5 - WL(T)0,7 - WD(V)3 - FT2

Fibran XPS 500-L

Recommended uses:
  • Inverted warm flat roofs
  • DUO roofs (low energy and passive houses)
  • PLUS roofs (renovations, energy-class upgrade)
  • Warm flat roofs
  • Green roofs
  • Roof terrace
  • Parking on inverted flat roof
  • Extra loaded floors
  • Cold storages
  • Perimeter basement walls, even if ground water is present
  • Foundation slabs
  • Bridges, roads and railways
Board thickness (mm) Quantity per package (m2) Compressive strength (kPa) Board dimensions (mm) Declared thermal conductivity (after 25 years) - W/mK
50 6 500 1250x600
ship-lap edge
smooth surface
0,034
60 5,25 0,035
80 3,75 0,035
100 3 0,035
120 2,25 0,036
140 2,25 0,038
160 1,50 0,040
180 1,5 0,040
XPS - EN 13164 - T1 - CS(10\Y)500 - CC(2/1,5/50)165 - DS(TH) - DLT(2)5 - WL(T)0,7 - WD(V)3 - FT2

Fibran XPS 700-L

Recommended uses:
  • Inverted warm flat roofs
  • DUO roofs (low energy and passive houses)
  • PLUS roofs (renovations, energy-class upgrade)
  • Warm flat roofs
  • Green roofs
  • Roof terraces
  • Parking on inverted flat roofs
  • Extra loaded floors
  • Cold storages
  • Perimeter basement walls, even if ground water is present
  • Foundation slabs
  • Bridges, roads and railways
  • Airport hangers and runways
Board thickness (mm) Quantity per package (m2) Compressive strength (kPa) Board dimensions (mm) Declared thermal conductivity (after 25 years) - W/mK
60 5,25 700 1250x600
ship-lap edge
smooth surface
0,035
80 3,75 0,035
100 3 0,035
120 2,25 0,036
XPS - EN 13164 - T1 - CS(10\Y)700 - DS(TH) - DLT(2)5 - WL(T)0,7 - WD(V)3 - FT2

Fibran XPS 300-I

Recommended uses:
  • Pitched roofs, eaves, small pitched roofs
  • Floors between storeys
  • Basement floors
  • Floor heating
Board thickness (mm) Quantity per package (m2) Compressive strength (kPa) Board dimensions (mm) Declared thermal conductivity (after 25 years) - W/mK
20 15 200 1250x600
straight edge
smooth surface
0,033
30 10,5 250 0,033
40 7,50 300 0,034
50 6 0,034
60 5,25 0,035
80 3,75 0,035
100 3 0,035
Manufacturing by request!
XPS - EN 13164 - T1 - CS(10\Y)* - DS(TH) - DLT(2)5 - WL(T)0,7 - WD(V)3 - FT2

Fibran XPS MAESTRO

Recommended uses:
  • Pitched roofs, eaves, small pitched roofs
  • Ceilings of warehouses, sports structures and agricultural building
  • Hanging façades
  • Overcladded façades, cavity walls
Board thickness (mm) Quantity per package (m2) Compressive strength (kPa) Board dimensions (mm) Declared thermal conductivity (after 25 years) - W/mK
50 13,44 250 2800x600
tongue and grooved edge, "D" profile
smooth surface
0,034
60 11,76 300 0,035
80 8,40 0,035
100 6,72 0,035
120 5,04 0,036
140 5,04 0,038
160 3,36 0,040
XPS - EN 13164 - T1 - CS(10\Y)* - DS(TH) - DLT(2)5 - WL(T)0,7 - WD(V)3 - FT2

Fibran XPS ETICS GF

Recommended uses:
  • Pitched roofs, eaves, small pitched roof
  • Façade plinths
  • Hanging façades
  • ETICS rendered façades
  • Blind thermal insulation formwork
  • Internal or sandwich wall insulation
  • Façades with stone facings
  • Sandwich panels
  • Thermal bridges (balconies, window and door jambs, concrete columns and tie-beams
  • Internal walls located next to colder spaces
Board thickness (mm) Quantity per package (m2) Compressive strength (kPa) Board dimensions (mm) Declared thermal conductivity (after 25 years) - W/mK
20 15 200 1250x600
straight edge
"waffled" surface
0,033
30 10,50 250 1250x600
ship-lap edge
"waffled" surface
0,033
40 7,50 250 0,034
50 6 300 0,034
60 5,25 0,035
80 3,75 0,035
100 3 0,035
120 2,25 0,036
140 2,25 0,038
160 1,50 0,040
180 1,50 0,040
XPS - EN 13164 - T3 - CS(10\Y)* - TR400 - DS(TH) - DLT(2)5 - WL(T)1,5

Fibran XPS ETICS BT

Recommended uses:
  • Pitched roofs, eaves, small pitched roofs
  • Façade plinths
  • Hanging façades
  • Ožbukana fasada ETICS
  • Blind thermal insulation formwork
  • Internal or sandwich wall insulation
  • Façades with stone facings
  • Sandwich panels
  • Thermal bridges (balconies, window and door jambs, concrete columns and tie-beams
  • Internal walls located next to colder spaces
Board thickness (mm) Quantity per package (m2) Compressive strength (kPa) Board dimensions (mm) Declared thermal conductivity (after 25 years) - W/mK
60 10,5 300 2500x600
ship-lap edge
rough surface with channels
0,035
80 7,5 0,035
100 6 0,035
120 4,50 0,036
180 3 0,040
XPS - EN 13164 - T3 - CS(10\Y)300 - TR400 - DS(TH) - DLT(2)5 - WL(T)1,5

Fibran XPS FABRIC

Recommended uses:
  • Pitched roofs, eaves, small pitched roofs
  • Sandwich panels
  • Thermal bridges (balconies, window and door jambs, concrete columns and tie-beams
  • Internal walls located next to colder spaces
  • Thermal insulation in combination with gypsum boards and other materials
  • Panels, door and window frames, door leaves, containers, insulation facing elements, tailor-made products
Products upon request:
  • Specified compressive strength CS(10/Y)300*[kPa]
  • Thermal conductivity from 0,033 do 0,040[W/mK]
straight edge, rough surface XPS-EN13164-T3-CS(10\Y)300*-DS(TH)-DLT(2)5-WL(T)1,5
Possibilities:
  • Thickness from 30 to 180 mm
  • Length from 1000 to 3100 mm
  • Width from 600 to 1200 mm
  • Cutting boards: thickness from 9 to 40 mm
  • Boards with different grooves
  • * It is possible to order boards of compressive strength from 300-700 kPa

Fibran XPS INCLINE

Recommended uses:
  • Inverted warm flat roofs
  • DUO roofs (low energy and passive houses)
  • PLUS roofs (renovations, energy-class upgrade)
  • Warm flat roofs
  • Green roofs
  • Roof terraces
  • Parking on inverted flat roofs
Hard thermal insulation boards in an inclinated form, which can substitute the inclinated breeze concrete on roof and external floor surfaces. By using them we gain the following:
  • Increase thermal efficiency
  • Decrease the weight (load)
  • Minimize the thickness of total construction (minimal basic thickness -1 cm)
Standard inclination: 1,67% and 2%
Special gradient and higher compressive strength* on request
Board’s dimensions: 1200x600 mm
Straight edge, rather smooth surface
XPS - EN 13164 - T3 - CS(10\Y)300* - DS(TH) - DLT(2)5 - WL(T)1,5 - WD(V)3

Fibran XPE - Protection against airborne sound

Recommended uses: In floor application, one layer of FIBRANxpe foil beneath or on top of thermal insulation can reduce the apparent level of impact noise by at least 18 dB

Thickness (mm) Width (mm) Length (mm)
3 1500 100
5
On top of the page